Blar i Publikasjoner fra CRIStin - NTNU på tittel
Viser treff 61-80 av 37215
-
3D in-Situ Stress Model of Upper Tamakoshi Hydroelectric Project Area
(Journal article; Peer reviewed, 2017)Reliable estimation of in-situ stress state is very important in implementing the shotcrete lined/unlined tunnels and shafts. The in-situ stress state of the area of concern is mainly governed by the gravityinduced stress, ... -
3D Integration technology: Status and application development
(Journal article; Peer reviewed, 2010)As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ... -
3D interpretation of helicopter-borne frequency-domain electromagnetic (HEM) data from Ramså Basin and adjacent areas at Andøya, Norway
(Peer reviewed; Journal article, 2020)The Ramså Basin is situated on the strandflat on the northeastern side of Andøya between Ramså and Skarstein. It is the only known Mesozoic sedimentary basin onshore Norway and therefore represents an easily accessible ... -
3D Joint Inversion of Scanning Magnetic Microscopy Data
(Journal article; Peer reviewed, 2021)Scanning magnetic microscopy (SMM) is a modern magnetometry technique that maps the magnetic anomalies resulting from small-scale variations of remanent magnetization within a sample. This information is vital to understand ... -
3D LiDAR and multi-technology collaboration for preservation of built heritage in China: A review
(Peer reviewed; Journal article, 2023)In recent years, the technical application of 3D LiDAR has gradually expanded to the field of built heritage. 3D scanning, high-precision measurement, and reconstruction have enriched the methods of built heritage preservation ... -
3D Maps of Mineral Composition and Hydroxyapatite Orientation in Fossil Bone Samples Obtained by X-ray Diffraction Computed Tomography
(Journal article; Peer reviewed, 2018)Whether hydroxyapatite (HA) orientation in fossilised bone samples can be non-destructively retrieved and used to determine the arrangement of the bone matrix and the location of muscle attachments (entheses), is a question ... -
A 3D mixed reality visualization of network topology and activity results in better dyadic cyber team communication and cyber situational awareness
(Journal article; Peer reviewed, 2023)Background: Cyber defense decision-making during cyber threat situations is based on human-to-human communication aiming to establish a shared cyber situational awareness. Previous studies suggested that communication ... -
3D modelling of β'' in Al-Mg-Si: towards an atomistic level ab initio based examination of a full precipitate enclosed in a host lattice
(Journal article, 2014)We extend a first principles based hierarchical multi-scale model scheme for describing a fully coherent precipitate in a host lattice to 3D simulations. As our test system, the needle-shaped main hardening Al–Mg–Si alloy ... -
3D motion dynamics of axisymmetric bodies falling through water
(Journal article; Peer reviewed, 2018)A new simplified method for analysis of 3D motion dynamics of axisymmetric slender bodies falling from air through water is presented. Slender-body theory for potential flow of incompressible water is combined with 2D + t ... -
3D Myocardial Mechanical Wave Measurements: Toward In Vivo 3D Myocardial Elasticity Mapping
(Peer reviewed; Journal article, 2020)Objectives This study aimed to investigate the potential of a novel 3-dimensional (3D) mechanical wave velocity mapping technique, based on the natural mechanical waves produced by the heart itself, to approach a noninvasive ... -
3D non-isothermal phase-field simulation of microstructure evolution during selective laser sintering
(Journal article; Peer reviewed, 2019)During selective laser sintering (SLS), the microstructure evolution and local temperature variation interact mutually. Application of conventional isothermal sintering model is thereby insufficient to describe SLS. In ... -
3D Numerical modelling of pile scour with free surface profile under waves and current using the level set method in model REEF3D
(Chapter, 2016)Wave action stirs up sediments and keeps it in suspension while currents wash it away from the coastal zone. The combined action of the waves and current close to the sediment bed may worsen the situation by creating ... -
3D numerical modelling of scour around a jacket structure with dynamic free surface capturing
(Peer reviewed; Journal article, 2020)This paper presents a numerical investigation of local scour with dynamic free surface capturing around a jacket structure. The hydrodynamics and resulting scour are calculated using the open-source CFD model REEF3D. The ... -
3D patient-specific numerical modeling of the soft palate considering adhesion from the tongue
(Journal article; Peer reviewed, 2018)Collapse of the soft palate in the upper airway contributes to obstructive sleeping apnea (OSA). In this study, we investigate the influence of the adhesion from the tongue on the soft palate global response. This is ... -
3D Printable Filaments Made of Biobased Polyethylene Biocomposites
(Journal article; Peer reviewed, 2018)Two different series of biobased polyethylene (BioPE) were used for the manufacturing of biocomposites, complemented with thermomechanical pulp (TMP) fibers. The intrinsic hydrophilic character of the TMP fibers was ... -
3D printed thermoelectric polyurethane/multiwalled carbon nanotube nanocomposites: A novel approach towards the fabrication of flexible and stretchable organic thermoelectrics
(Peer reviewed; Journal article, 2020)Three-dimensional (3D) printing of thermoelectric polymer nanocomposites is reported for the first time employing flexible, stretchable and electrically conductive 3D printable thermoplastic polyurethane (TPU)/multiwalled ... -
3D Printing Spatially-varying Color and Translucency
(Journal article; Peer reviewed, 2018)We present an efficient and scalable pipeline for fabricating full-colored objects with spatially-varying translucency from practical and accessible input data via multi-material 3D printing. Observing that the costs ... -
A 3D reactive collision avoidance algorithm for underactuated underwater vehicles
(Peer reviewed; Journal article, 2020)Avoiding collisions is an essential goal of the control system of autonomous vehicles. This paper presents a reactive algorithm for avoiding obstacles in a three‐dimensional space, and shows how the algorithm can be applied ... -
3D reconstruction of gastrointestinal regions using shape-from-focus
(Peer reviewed; Journal article, 2023)3D shape reconstruction from images is an active topic in computer vision. Shape-from-Focus (SFF) is an important approach which requires image stack in a focus controlled manner to infer the 3D shape. In this article, 3D ... -
3D Reconstruction of Gastrointestinal Regions Using Single-View Methods
(Peer reviewed; Journal article, 2023)Capsule endoscopy is about to become an alternative to traditional colonoscopy. One uses a wireless camera to visualize the gastrointestinal (GI) tract. A 3D model based on image sequences obtained from wireless capsule ...