Show simple item record

dc.contributor.authorMyhr, Ole Runar
dc.contributor.authorBørvik, Tore
dc.contributor.authorMarioara, Calin Daniel
dc.contributor.authorWenner, Sigurd
dc.contributor.authorHopperstad, Odd Sture
dc.date.accessioned2021-01-26T07:51:29Z
dc.date.available2021-01-26T07:51:29Z
dc.date.created2020-11-18T10:56:00Z
dc.date.issued2020
dc.identifier.citationMechanics of materials (Print). 2020, 151 .en_US
dc.identifier.issn0167-6636
dc.identifier.urihttps://hdl.handle.net/11250/2724649
dc.description.abstractKinematic hardening is incorporated into a nanoscale model for 6000 series aluminium alloys consisting of three sub-models describing in turn precipitation of hardening particles, yield strength and work hardening. The kinematic hardening model assumes that the backstress is caused by an unrelaxed plastic strain around non-shearable particles which is defined by an evolution equation. Compression-tension tests are performed on a cast and homogenized AA6063 aluminium alloy in tempers T6 (peak strength), T7 (overaged) and O (annealed). These tempers have different amounts of non-shearable hardening precipitates and thus exhibit various levels of kinematic hardening. The pre-compression is varied between 0.5% and 6% strain, after which the specimen is stretched to fracture. The grain structure, the constituent particles and the precipitate structure of the three tempers of the alloy are characterized by means of optical microscopy and scanning and transmission electron microscopy. The alloy displays marked kinematic hardening in all three tempers, whereas hardening stagnation is observed for tempers T7 and O. The proposed model captures the stress-strain response during strain reversal by means of the backstress and the storage and annihilation of geometrically necessary dislocations at the non-shearable particles.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleNanoscale modelling of combined isotropic and kinematic hardening of 6000 series aluminium alloysen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.source.pagenumber14en_US
dc.source.volume151en_US
dc.source.journalMechanics of materials (Print)en_US
dc.identifier.doi10.1016/j.mechmat.2020.103603
dc.identifier.cristin1849148
dc.relation.projectNorges forskningsråd: 250553en_US
dc.description.localcode/© 2020 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).en_US
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Navngivelse 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Navngivelse 4.0 Internasjonal