Vis enkel innførsel

dc.contributor.authorOrtega, Guillermo Sotorrío
dc.contributor.authorMadrid, Javier Alonso
dc.contributor.authorOlsson, Nils
dc.contributor.authorRíos, José Antonio Tenorio
dc.date.accessioned2020-09-07T10:31:09Z
dc.date.available2020-09-07T10:31:09Z
dc.date.created2020-09-02T10:57:13Z
dc.date.issued2020
dc.identifier.citationBuildings. 2020, 10 (9), 144-?.en_US
dc.identifier.issn2075-5309
dc.identifier.urihttps://hdl.handle.net/11250/2676627
dc.description.abstractThe construction industry has embraced digitisation and industrialisation in response to the need to increase its productivity, optimise material consumption and improve workmanship. Additive manufacturing (AM), more widely known as 3D printing, has driven substantial progress in these respects in other industries, and a number of national and international projects have helped to introduce the technique to the construction industry. As with other innovative processes not covered by uniform standards, appropriate assessments and testing methodologies to control the quality of the 3D-printed end products, while not obligatory, are advisable. This article shows that regulation is not an obstacle to the use of an innovative product, such as 3D printing, by proposing quality-control tests and an assessment methodology, in the understanding that standardisation ensures the viability of a technology. The information, including the methods and results, is based on the authors’ experiences in the development of three research projects pertaining to 3D printing. This paper also discusses whether the performance of the materials used in 3D printing could be superior to traditional ones.en_US
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleThe Application of 3D-Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Productsen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.source.pagenumber144-?en_US
dc.source.volume10en_US
dc.source.journalBuildingsen_US
dc.source.issue9en_US
dc.identifier.doihttps://doi.org/10.3390/buildings10090144
dc.identifier.cristin1826664
dc.description.localcodeThis is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly citeden_US
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal