Vis enkel innførsel

dc.contributor.authorTing, Song
dc.contributor.authorDeng, Jing
dc.contributor.authorDeng, Liyuan
dc.contributor.authorBai, Lu
dc.contributor.authorZhang, Xiangping
dc.contributor.authorZhang, Suojiang
dc.contributor.authorSzabo, Peter
dc.contributor.authorDaugaard, Anders E.
dc.date.accessioned2020-05-18T07:57:11Z
dc.date.available2020-05-18T07:57:11Z
dc.date.created2018-12-07T15:58:45Z
dc.date.issued2019
dc.identifier.citationPolymer. 2019, 160 223-230.en_US
dc.identifier.issn0032-3861
dc.identifier.urihttps://hdl.handle.net/11250/2654719
dc.description.abstractRoom temperature ionic liquids (RTILs) are known to exhibit high CO2 solubility, which makes them interesting candidates for separation and purification of mixed gas streams. Particularly, RTILs based on imidazoles have shown very promising results. However, membranes of the corresponding poly(RT-IL)s are inherently brittle, which makes them too fragile for use in freestanding membranes. Therefore, copolymers of N-vinylimidazole (VIm) and butyl acrylate (BuA) were prepared, showing reactivity ratios of rBuA = 1.91–2.02 and rVIm = 0.094–0.10. The prepared copolymers of poly(VIm-co-BuA) with a copolymer composition of 24:76 had sufficiently low Tg (−6.6 °C) and were flexible enough to be used for membrane preparation. The copolymer was quarternized and crosslinked in a one-pot reaction into thin film membranes employing a mixture of mono and difunctional alkyl halides. Membranes were prepared using a mixture of 1:8, 1:2 and 1:0 of 1,6-dibromohexane and 1-bromobutane, resulting in different degrees of crosslinking. The one-pot process additionally allows incorporation of up to 16 wt% free RTIL (BMIM Tf2N) in the 1:0 ratio membranes. All membranes were tested for CO2 permeability (33.7–54.38 barrer), and for selectivity towards N2 and CH4. By varying the crosslinking degree, it was observed that CO2 permeability increased with decreasing the degree of crosslinking. Finally, films prepared with free RTIL led to an improvement of the gas separation performance, with CO2 permeability increased from 33.71 to 38.77 barrer and CO2/N2 permselectivity increased from 20.81 to 27.82.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titlePoly(vinylimidazole-co-butyl acrylate) membranes for CO2 separationen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionacceptedVersionen_US
dc.source.pagenumber223-230en_US
dc.source.volume160en_US
dc.source.journalPolymeren_US
dc.identifier.doi10.1016/j.polymer.2018.11.058
dc.identifier.cristin1640499
dc.description.localcode© 2018. This is the authors’ accepted and refereed manuscript to the article. Locked until 27.11.2020 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ "en_US
cristin.unitcode194,66,30,0
cristin.unitnameInstitutt for kjemisk prosessteknologi
cristin.ispublishedtrue
cristin.fulltextpreprint
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal