Show simple item record

dc.contributor.authorLi, Yang
dc.contributor.authorRen, Xiaobo
dc.contributor.authorHe, Jianying
dc.contributor.authorZhang, Zhiliang
dc.date.accessioned2020-04-17T07:09:21Z
dc.date.available2020-04-17T07:09:21Z
dc.date.created2019-10-31T05:03:51Z
dc.date.issued2019
dc.identifier.issn0997-7538
dc.identifier.urihttps://hdl.handle.net/11250/2651407
dc.description.abstractThe effect of residual stress on fracture of materials or structures has been widely studied. However, its influence on ductile-to-brittle transition (DBT), a crucial phenomenon of structural materials, has rarely been investigated so far. In the present study, employing the eigenstrain method residual stresses are introduced into a bi-material specimen, where two configurations of crack and interface, e.g., one with interface perpendicular and one parallel to the crack extension, are designed to study the influence of residual stress. The DBT of the bi-material specimen in the presence of residual stresses is numerically studied by using the CAFE method where temperature dependent surface energy is implemented to calculate absorbed energy of Charpy impact testing specimen. It is found that residual stress generated in the two configurations affect the DBT in a similar manner. The DBT curves generally shift to higher temperature due to the decrease of absorbed energy with the increase of residual stress. It is found that the decrease of absorbed energy in both configurations is caused by the additional constraint on the notch root, which is induced by the residual stress and can facilitate the fracture.en_US
dc.description.abstractThe Effect of Thermal Residual Stresses on Ductile-to-Brittle Transition of a Welded TMCR Steel by Using CAFE Methoden_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleThe Effect of Thermal Residual Stresses on Ductile-to-Brittle Transition of a Welded TMCR Steel by Using CAFE Methoden_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionpublishedVersionen_US
dc.source.volume80en_US
dc.source.journalEuropean Journal of Mechanics. A, Solidsen_US
dc.identifier.doi10.1016/j.euromechsol.2019.103889
dc.identifier.cristin1742547
dc.relation.projectNorges forskningsråd: 228513en_US
dc.description.localcode© 2019 The Authors. Published by Elsevier Masson SAS. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).en_US
cristin.unitcode194,64,45,0
cristin.unitnameInstitutt for konstruksjonsteknikk
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Navngivelse 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Navngivelse 4.0 Internasjonal