Vis enkel innførsel

dc.contributor.authorVestad, Håvard
dc.contributor.authorKriesi, Carlo
dc.contributor.authorSlåttsveen, Kristoffer
dc.contributor.authorSteinert, Martin
dc.date.accessioned2020-01-02T07:40:22Z
dc.date.available2020-01-02T07:40:22Z
dc.date.created2019-09-10T13:00:58Z
dc.date.issued2019
dc.identifier.citationProceedings of the International Conference on Engineering Design. 2019, 1 199-208.nb_NO
dc.identifier.issn2220-4334
dc.identifier.urihttp://hdl.handle.net/11250/2634536
dc.description.abstractAn essential part of any space in which physical prototyping and prototype-driven product development is being conducted is the education of its users in the necessary skills to fully utilise the material resources of the space. This paper describes how two different skills were transferred between five projects in our research laboratory, TrollLABS. Based on the observed skill-transfers in the production of PCBs and use of RF-communication in mechatronics projects certain tendencies emerged: How the use of forced vocal experience sharing; And in-person transferring of skills has impacted the acquired skills of the learner. The observations further show that through the guidance of a more experienced user the learner is able to make “skill-jumps”: Intermediate skill steps, as well as underlying detailed knowledge, are skipped and the learner is able to reach a high skill level in a shorter time than the original acquirer of the skill. Furthermore, skills are retained in the space through cross-generational collaboration and communication. This article aims to share these insights and provide a starting point for answering some of the challenges of modern maker spaces.nb_NO
dc.language.isoengnb_NO
dc.publisherCambridge University Pressnb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleObservations on the Effects of Skill Transfer through Experience Sharing and In-Person Communicationnb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionpublishedVersionnb_NO
dc.source.pagenumber199-208nb_NO
dc.source.volume1nb_NO
dc.source.journalProceedings of the International Conference on Engineering Designnb_NO
dc.identifier.doi10.1017/dsi.2019.23
dc.identifier.cristin1723266
dc.description.localcode© The Author(s) 2019 This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.nb_NO
cristin.unitcode194,64,92,0
cristin.unitnameInstitutt for maskinteknikk og produksjon
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal