dc.contributor.advisor | Pål Skalle | |
dc.contributor.author | Christoffer Rame Sigvathsen | |
dc.date.accessioned | 2019-10-31T15:20:13Z | |
dc.date.available | 2019-10-31T15:20:13Z | |
dc.date.issued | 2019 | |
dc.identifier.uri | http://hdl.handle.net/11250/2625917 | |
dc.description.abstract | En av de viktigste utfordringene i industrien i dag er å finne tiltak som kan redusere kostnad.
En måte å gjøre dette på er å gjøre boreoperasjonen mer effektiv ved å fjerne kildene til
nedetid. Ved å fjerne kilden til en hendelse som hindret boreoperasjonen, blir ikke bare den
assosierte utstyrskostnaden og driftskostnadene redusert, men også forsinkelsen på prosjektet.
Å kunne vite den nøyaktige posisjonen til en brønn mens man borer, samtidige som man
opprettholder styringskontroll, er fundamentalt i konstruksjonen av nye brønner. Metoder på
hvordan man oppnår disse egenskapene har forandret seg oppigjennom årene og er under
stadig utvikling for å kunne nå nye hydrokarboner.
Denne tesen baserer seg på rapportene og sann-tid boredata fra to brønner i Nordsjøen.
Dataen ble analysert i et forsøk på å finne en sammenheng mellom årsakene til nedetid
manglende styring. Rapportene ble analysert sammen med sann-tids boredata for å oppnå en
forståelse for brønnene og hendelsene i dem. Dataen måtte bli lest i et MATLAB program
som gjorde for å gjøre den lesbar og presentabel. De fleste hendelsene i brønnene er ikke
direkte tilknyttet styring. Hvis en feil finner sted og det blir urettmessig antatt at posisjonen til
brønnen er korrekt, er det lettere å peke ut en annen kilde for feilen. | |
dc.description.abstract | One of the most important challenges in the industry today is finding ways to reduce cost.
One approach is to make the drilling process more effective by eliminating sources of nonproductive
time. By removing the source of an event that delayed drilling operations, not only
is the associated equipment damage and cost of operations reduced, but it also the removes
the delay on the project. The ability to simultaneously know the position of a well and
maintain directional control is fundamental in the construction of new wells. Methods on how
to best achieve these two goals have changed through the years and are under further
development to enhance the ability to reach hydrocarbons.
This thesis is based on the reports and Real Time Drilling data from two wells in the North
Sea. The data was analysed in an effort to uncover a correlation between the events that
caused Non-Productive time and the lack of directional control. Reports were analysed
alongside the Real Time Drilling data to gain an understanding of the well and its events. The
data required to be processed in a MATLAB script, enabling it to be read and presented. Most
of the events that took place in the wells are not directly corelated with directional control. If
an error occurs and it is wrongfully assumed the positioning of the well is correct, other
sources of the error are more easily pointed out as the obvious culprit. | |
dc.language | eng | |
dc.publisher | NTNU | |
dc.title | Downhole errors | |
dc.type | Master thesis | |