Vis enkel innførsel

dc.contributor.authorGiske, Lars André Langøyli
dc.contributor.authorBenjaminsen, Tommy
dc.contributor.authorMork, Ola Jon
dc.contributor.authorLøvdal, Trond
dc.date.accessioned2019-10-24T07:02:50Z
dc.date.available2019-10-24T07:02:50Z
dc.date.created2019-10-17T09:30:26Z
dc.date.issued2019
dc.identifier.citationProcedia CIRP. 2019, 81 512-517.nb_NO
dc.identifier.issn2212-8271
dc.identifier.urihttp://hdl.handle.net/11250/2624031
dc.description.abstractThis paper presents two case studies in which a framework for classifying the needed Level of Detail, Level of Accuracy and Level of Recognizability for 3D-scanns are used to 1) support installation of a robotic system for cleaning of fish processing lines and 2) support a retrofitting engineering project. Both cases are set in the Norwegian Aquaculture Industry. In Case 1, effort is done to develop a robotic cleaning solution for fish processing plants, due to a need to rationalize and automate the process. The chances of errors in the manual cleaning process is large. 3D-scanning is successfully used to create a solid model of processing equipment which in turn is used to create a cleaning path for the robot. In Case 2, the point cloud from 3D-scanning is used to check a planned layout of a retrofit project against the actual processing plant. Typically, such retrofit projects take more time and costs more money than initially planned because of unforeseen rework is necessary. This often is a result from poor or missing documentation of the existing processing plant. During the project, several errors were discovered in the planned installation due to missing or wrong information about the existing plant. Both cases show that point clouds from 3D-scans greatly enhances communication, can aid in getting rid of design errors in the planning phase and can help shortening installation and commissioning times. 3D-scans are also beneficial when developing robotic simulations in complex environments. The framework helps in classifying the needed amount of work for 3D-scanning projects based on what the needed output is, thus potentially mitigating unnecessary resources being spent on either the scanning itself or post-processing of scan-data.nb_NO
dc.language.isoengnb_NO
dc.publisherElseviernb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleVisualization Support for Design of Manufacturing Systems and Prototypes – Lessons Learned from Two Case Studiesnb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionpublishedVersionnb_NO
dc.source.pagenumber512-517nb_NO
dc.source.volume81nb_NO
dc.source.journalProcedia CIRPnb_NO
dc.identifier.doi10.1016/j.procir.2019.03.139
dc.identifier.cristin1737870
dc.description.localcode© 2017 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/)nb_NO
cristin.unitcode194,64,92,0
cristin.unitcode194,64,93,0
cristin.unitnameInstitutt for maskinteknikk og produksjon
cristin.unitnameInstitutt for havromsoperasjoner og byggteknikk
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal