Vis enkel innførsel

dc.contributor.authorLiu, Ting
dc.contributor.authorLeira, Bernt Johan
dc.contributor.authorFu, Ping
dc.contributor.authorBai, Yong
dc.contributor.authorLiu, Dahui
dc.date.accessioned2019-04-25T08:33:29Z
dc.date.available2019-04-25T08:33:29Z
dc.date.created2018-12-03T20:39:32Z
dc.date.issued2018
dc.identifier.citationOcean Engineering. 2018, 148 43-52.nb_NO
dc.identifier.issn0029-8018
dc.identifier.urihttp://hdl.handle.net/11250/2595403
dc.description.abstractReliability-based safety factors for metallic strip flexible pipes(MSFP) subjected to external pressure are calibrated in this paper. The partial safety factors of such pipes are obtained by introducing a target reliability index and using a combination of Monte-Carlo simulation and FORM. The relationship between the safety factors and the coefficient of variation for key basic variables as well as the impact of different distribution types for both the resistance and load effect parameters on the calibrated results are investigated. Recommended design safety factor for MSFP is given similar to the widely used design safety factor for conventional metallic pipes. The calibration process presented in this paper is relatively easy to understand and to carry out. This also applies to cases with multiple components and even requiring complex iterations in relation to the mechanical model. The results obtained here can provide some guidance in connection with manufacturing procedures at the initial design stage of the MSFP.nb_NO
dc.language.isoengnb_NO
dc.publisherElseviernb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleReliability-based safety factor for metallic strip flexible pipe subjected to external pressurenb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionacceptedVersionnb_NO
dc.source.pagenumber43-52nb_NO
dc.source.volume148nb_NO
dc.source.journalOcean Engineeringnb_NO
dc.identifier.doi10.1016/j.oceaneng.2017.10.025
dc.identifier.cristin1638690
dc.description.localcode© 2018. This is the authors’ accepted and refereed manuscript to the article. Locked until 1511.2019 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/nb_NO
cristin.unitcode194,64,20,0
cristin.unitnameInstitutt for marin teknikk
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal