Vis enkel innførsel

dc.contributor.authorJi, Guomin
dc.contributor.authorKanstad, Terje
dc.contributor.authorBjøntegaard, Øyvind
dc.date.accessioned2019-01-23T16:58:36Z
dc.date.available2019-01-23T16:58:36Z
dc.date.created2019-01-23T13:55:22Z
dc.date.issued2018
dc.identifier.citationAdvances in Civil Engineeringnb_NO
dc.identifier.issn1687-8086
dc.identifier.urihttp://hdl.handle.net/11250/2582023
dc.description.abstractCracking of concrete structures during the hardening phase often seriously compromises not only structure integrity but also durability and long-term service life. Especially for large massive structures, for example, concrete submerged tunnel, the reliable crack risk evaluation at the hardening phase is critical to the successful design. Mineral additives such as silica fume (SF), blast furnace slag (BFS), and fly ash (FA) have been used extensively in production of high-performance concrete in the last decades. The mineral additives such as FA and BFS not only reduce the hydration heat during the hardening phase but also have significant influence on the development of mechanic and viscoelastic properties at an early age. The main objective of the research is to propose a design methodology to select the appropriate composition of concrete for construction of the submerged tunnel. The influence of mineral additives such as FA and BFS on the risk of cracking during the hardening phase was investigated for the massive concrete structure. Five types of concrete mixes denoted as SV40, 40% BFS, 60% BFS, 40% FA, and 60% FA concrete are considered in the current study, and the measurement to reduce the initial temperature is also considered for 60% FA concrete. First, the well-documented material models are verified by calibration of restraint stress development in the TSTM test by using the finite element method (FEM), and then the 3D thermal-structural analysis is performed to assess the cracking risk for the submerged tunnel during the hardening phase. Based on analysis results, the 60% FA concrete has both the lowest maximum temperature and the lowest stress/strength ratio, and the cracking-free design based on the current study ensures the successful construction of the submerged tunnel.nb_NO
dc.language.isoengnb_NO
dc.publisherHindawi Publishing Corporationnb_NO
dc.rightsNavngivelse 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/deed.no*
dc.titleCrack risk evaluation of submerged concrete tunnel during hardening phasenb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionpublishedVersionnb_NO
dc.source.volume2018nb_NO
dc.source.journalAdvances in Civil Engineering / Hindawinb_NO
dc.identifier.doi10.1155/2018/7354025
dc.identifier.cristin1663752
dc.description.localcodeDenne artikkelen er Open Access etter CC BY 4.0 lisensnb_NO
cristin.unitcode194,64,45,0
cristin.unitnameInstitutt for konstruksjonsteknikk
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Navngivelse 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Navngivelse 4.0 Internasjonal