Vis enkel innførsel

Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections

dc.contributor.authorSønstabø, Johan Kolstø
dc.contributor.authorMorin, David
dc.contributor.authorLangseth, Magnus
dc.date.accessioned2018-10-19T07:19:42Z
dc.date.available2018-10-19T07:19:42Z
dc.date.created2018-10-18T14:57:18Z
dc.date.issued2018
dc.identifier.citationInternational Journal of Impact Engineering. 2018, 155 58-75.nb_NO
dc.identifier.issn0734-743X
dc.identifier.urihttp://hdl.handle.net/11250/2568765
dc.description.abstractA new component test suited for quasi-static and dynamic testing of flow-drill screw connections is presented. The component specimen was made of two different aluminium alloys, and included connections with two material combinations. Large-scale finite element simulations were carried out of each test, in which the connections were modelled with a constraint-based macroscopic model. An improvement of the connection modelling technique is presented. The model was calibrated to cross tension, cross mixed and single lap-joint tests, and validated with peeling and the component tests.nb_NO
dc.language.isoengnb_NO
dc.publisherElseviernb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleStatic and dynamic testing and modelling of aluminium joints with flow-drill screw connectionsnb_NO
dc.title.alternativeStatic and dynamic testing and modelling of aluminium joints with flow-drill screw connectionsnb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionacceptedVersionnb_NO
dc.source.pagenumber58-75nb_NO
dc.source.volume155nb_NO
dc.source.journalInternational Journal of Impact Engineeringnb_NO
dc.identifier.doihttps://doi.org/10.1016/j.ijimpeng.2018.01.008
dc.identifier.cristin1621461
dc.relation.projectNorges forskningsråd: 237885nb_NO
dc.description.localcode© 2018. This is the authors’ accepted and refereed manuscript to the article. Locked until 12.1.2020 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/nb_NO
cristin.unitcode194,64,45,0
cristin.unitnameInstitutt for konstruksjonsteknikk
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode2


Tilhørende fil(er)

Thumbnail
Filnavn:
paper_4.pdf
Størrelse:
39.04Mb
Format:
PDF
Åpne

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Med mindre annet er angitt, så er denne innførselen lisensiert som Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal