Show simple item record

dc.contributor.authorKriesi, Carlo
dc.contributor.authorBjelland, Øystein
dc.contributor.authorSteinert, Martin
dc.date.accessioned2018-04-18T12:18:37Z
dc.date.available2018-04-18T12:18:37Z
dc.date.created2017-11-21T14:55:32Z
dc.date.issued2018
dc.identifier.citationProcedia Manufacturing. 2018, 21 205-212.nb_NO
dc.identifier.issn2351-9789
dc.identifier.urihttp://hdl.handle.net/11250/2494824
dc.description.abstractInjection molding is essential for mass manufacturing plastic parts in all sizes and shapes. However, predicting the quality of a mold is tricky, and while computer simulations are highly advanced, they rely on conservative models, leading to over-dimensioned parts. Furthermore, it becomes practically impossible to prototype a part with the real materials, since a simple mold drives costs and remodeling thereof is time consuming, if not impossible. By building our own desktop sized injection molding machine, we were able to explore the possibilities of prototyping injection molded parts and test a variety of mold materials in order to quantify the outcomes in a three-point bending test. Subsequently, the learnings were applied to a full-scale model, which was tested in an industrial setting. The outcome shows that one can apply rapid prototyping, and subsequent test-build-iteration circles to mass-manufactured parts, allowing for rapidly optimizing material usage, and user interactions.nb_NO
dc.language.isoengnb_NO
dc.publisherElseviernb_NO
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internasjonal*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/deed.no*
dc.titleFast and iterative prototyping for injection molding – a case study of rapidly prototypingnb_NO
dc.typeJournal articlenb_NO
dc.typePeer reviewednb_NO
dc.description.versionpublishedVersionnb_NO
dc.source.pagenumber205-212nb_NO
dc.source.volume21nb_NO
dc.source.journalProcedia Manufacturingnb_NO
dc.identifier.doi10.1016/j.promfg.2018.02.112
dc.identifier.cristin1516758
dc.relation.projectNorges forskningsråd: 236739/O30nb_NO
dc.relation.projectNorges forskningsråd: 236739nb_NO
dc.description.localcode© 2018 The Author(s). Published by Elsevier B.V. Under a CC BY-NC-ND 4.0 license (https://creativecommons.org/licenses/by-nc-nd/4.0/)nb_NO
cristin.unitcode194,64,92,0
cristin.unitnameInstitutt for maskinteknikk og produksjon
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal