Vis enkel innførsel

dc.contributor.authorChu, Yingguang
dc.contributor.authorHatledal, Lars Ivar
dc.contributor.authorSanfilippo, Filippo
dc.contributor.authorÆsøy, Vilmar
dc.contributor.authorZhang, Houxiang
dc.contributor.authorSchaathun, Hans Georg
dc.date.accessioned2017-12-12T13:35:31Z
dc.date.available2017-12-12T13:35:31Z
dc.date.created2015-06-18T13:52:43Z
dc.date.issued2015
dc.identifier.isbn978-1-4673-7164-3
dc.identifier.urihttp://hdl.handle.net/11250/2470822
dc.description.abstractThis paper presents the framework of a virtual prototyping system for the design and simulation of maritime crane operations. By combining the rapid-prototyping approach with the concept of interchangeable interfaces, different demanding operation scenarios can be simulated including models of the corresponding physical systems, the vessel and the surrounding environment. Multiple tradeoffs and alternative solutions can be evaluated during the design phase. This process can be achieved within a short time period, allowing for the reduction of lead-times as well as for the abatement of mistakes or system failures that may otherwise cause fatal accidents in real tests. In addition, the virtual simulator can also be used for training purposes allowing for a substantial improvement in working efficiency and operation safety. The software architecture of the proposed framework is based on the application of the Functional Mock-up Interface standard. This utilizes the current available modelling tools and allows for the exchange of dynamic models and for co-simulation of different models according to the current designing needs. The development of the framework and involved modules of maritime crane systems are described. Preliminary simulations are presented to show the effectiveness and flexibility of the proposed framework.nb_NO
dc.language.isoengnb_NO
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)nb_NO
dc.relation.ispartofProceedings of Oceans '15 MTS/IEEE, Genova, Italy, May 18-21, 2015
dc.titleVirtual prototyping system for maritime crane design and operation based on functional mock-up interfacenb_NO
dc.typeChapternb_NO
dc.typePeer reviewednb_NO
dc.description.versionacceptedVersionnb_NO
dc.identifier.doi10.1109/OCEANS-Genova.2015.7271342
dc.identifier.cristin1249194
dc.relation.projectNorges forskningsråd: 235309nb_NO
dc.description.localcode© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.nb_NO
cristin.unitcode194,64,93,0
cristin.unitcode194,63,55,0
cristin.unitnameInstitutt for havromsoperasjoner og byggteknikk
cristin.unitnameInstitutt for IKT og realfag
cristin.ispublishedtrue
cristin.fulltextoriginal
cristin.qualitycode1


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel