dc.contributor.author | Bernhardt, Markus | |
dc.contributor.author | Tellesbø, Hilde | |
dc.contributor.author | Justnes, Harald | |
dc.contributor.author | Wiik, Kjell | |
dc.date.accessioned | 2017-10-31T10:08:27Z | |
dc.date.available | 2017-10-31T10:08:27Z | |
dc.date.created | 2013-12-12T14:24:30Z | |
dc.date.issued | 2014 | |
dc.identifier.citation | Journal of the European Ceramic Society. 2014, 34 (5), 1341-1351. | nb_NO |
dc.identifier.issn | 0955-2219 | |
dc.identifier.uri | http://hdl.handle.net/11250/2463118 | |
dc.description.abstract | Carbon steel fibre reinforced lightweight aggregates (LWA) were produced in a pilot scale rotary kiln. Narrow size fractions as well as not-sieved (asreceived) material were investigated according to European standards with a main focus on strength and density and compared to a reference materialwithout fibres. Depending on the size of the pellets a fraction of the fibres oxidized during firing. A strength increase proportional to the amountof non-oxidized fibres within the pellet was observed. The crushing resistance for as received fibre reinforced pellets (bulk density 452 kg/m3) was3.0 MPa corresponding to an increase in strength of 140%. The enhanced strength was also confirmed by the single pellet compression test. | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | Elsevier | nb_NO |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/deed.no | * |
dc.title | Fibre reinforced lightweight aggregates | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | acceptedVersion | nb_NO |
dc.source.pagenumber | 1341-1351 | nb_NO |
dc.source.volume | 34 | nb_NO |
dc.source.journal | Journal of the European Ceramic Society | nb_NO |
dc.source.issue | 5 | nb_NO |
dc.identifier.doi | 10.1016/j.jeurceramsoc.2013.11.009 | |
dc.identifier.cristin | 1076039 | |
dc.description.localcode | © 2013. This is the authors’ accepted and refereed manuscript to the article. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ | nb_NO |
cristin.unitcode | 194,66,35,0 | |
cristin.unitname | Institutt for materialteknologi | |
cristin.ispublished | true | |
cristin.fulltext | postprint | |
cristin.qualitycode | 1 | |