Vis enkel innførsel

dc.contributor.advisorTyppø, Jukka Tapionb_NO
dc.contributor.advisorFikstvedt, Oddgeir
dc.contributor.authorEliassen, Thomasnb_NO
dc.date.accessioned2014-12-19T13:43:57Z
dc.date.accessioned2015-12-22T11:41:42Z
dc.date.available2014-12-19T13:43:57Z
dc.date.available2015-12-22T11:41:42Z
dc.date.created2010-09-04nb_NO
dc.date.issued2006nb_NO
dc.identifier348404nb_NO
dc.identifierntnudaim:1133
dc.identifier.urihttp://hdl.handle.net/11250/2369301
dc.description.abstractThis master thesis presents the design of a high IIP2 direct-conversion receiver front-end, consisting of a LNA and I- and Q-channel mixers. The front-end is implemented in a 0.18 μm technology with 1.8V supply voltage. Problems that are especially severe for direct-conversion receivers are presented; 1/f-noise, DC offset, and second-order nonlinearity, with particular attention to the latter. Methods to improve the IIP2 are presented and explored in the design of the front-end. The complete front-end has -19.7 dBm IIP3, 4 dB noise figure, and consume 7.4mA of current from a 1.8V supply. Through mixer load tuning an IIP2 of more than +48 dBm is achieved for the front-end.nb_NO
dc.languageengnb_NO
dc.publisherInstitutt for elektronikk og telekommunikasjonnb_NO
dc.subjectntnudaimno_NO
dc.subjectSIE6 elektronikk
dc.subjectKrets- og systemkonstruksjon
dc.titleDesign of a high IIP2 2.4GHz RF Front-endnb_NO
dc.typeMaster thesisnb_NO
dc.source.pagenumber73nb_NO
dc.contributor.departmentNorges teknisk-naturvitenskapelige universitet, Fakultet for informasjonsteknologi, matematikk og elektroteknikk, Institutt for elektronikk og telekommunikasjonnb_NO


Tilhørende fil(er)

Thumbnail
Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel