Show simple item record

dc.contributor.advisorØiseth, Ole Andre
dc.contributor.authorSchanke, Sindre Aavik
dc.date.accessioned2015-10-05T15:17:18Z
dc.date.available2015-10-05T15:17:18Z
dc.date.created2015-06-03
dc.date.issued2015
dc.identifierntnudaim:13034
dc.identifier.urihttp://hdl.handle.net/11250/2351368
dc.description.abstractAs a part of the new coastal highway E39 which is being planned and built along the west coast of Norway by the Norwegian Public Roads Administration, state of the art methods of structural dynamics needs to be developed and used to cross the deep and wide fjords. Operational modal analysis aims to find the modal properties; natural frequencies, damping ratios and mode shapes of a structure while it is under operating conditions using its vibration data. Several methods of operational modal analysis are developed and they can broadly be divided into time-domain and frequency-domain. Theory of operational modal analysis and the methods chosen are presented in this thesis. The main objective of this thesis was to develop MATLAB functions which implements several of these methods. The methods are performed on two case studies. A shear frame with low and high damping where the exact modal parameters are known, this is done to check that the methods work properly and to see how damping influences the accuracy of the methods. Then the methods are used on the Hardanger Bridge, a bridge in operating conditions. The modal properties are extracted for each of the methods and then compared on account of accuracy. The methods are also compared regarding ease of use and computational efficiency. Most of the methods found the natural frequencies for the low damping shear frame, but for high damping some of the methods proved to be inadequate. For damping ratio and mode shapes only a few of the methods managed to give satisfactory results. For the Hardanger Bridge most of the methods managed to find the natural frequencies, but only a few managed to estimate the damping ratios and mode shapes. Overall, Cov-SSI proved to be the best method.
dc.languageeng
dc.publisherNTNU
dc.subjectBygg- og miljøteknikk, Beregningsmekanikk
dc.titleOperational Modal Analysis of Large Bridges
dc.typeMaster thesis
dc.source.pagenumber175


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record