Blar i Institutt for materialteknologi på tidsskrift "Materials Characterization"
Viser treff 1-10 av 10
-
Correlated subgrain and particle analysis of a recovered Al-Mn alloy by directly combining EBSD and backscatter electron imaging
(Journal article, 2022)Correlated analysis of (sub)grains and particles in alloys is important to understand transformation processes and control material properties. A multimodal data fusion workflow directly combining subgrain data from electron ... -
Correlating laser energy with compositional and atomic-level information of oxides in atom probe tomography
(Peer reviewed; Journal article, 2023)Atom probe tomography (APT) is a 3D analysis technique that offers unique chemical accuracy and sensitivity with sub-nanometer spatial resolution. There is an increasing interest in the application of APT to complex oxides ... -
High resolution crystal orientation mapping of ultrathin films in SEM and TEM
(Peer reviewed; Journal article, 2022)Ultrathin metallic films are important functional materials for optical and microelectronic devices. Dedicated characterization with high spatial resolution and sufficient field of view is key to the understanding of the ... -
Lattice rotations in precipitate free zones in an Al-Mg-Si alloy
(Journal article; Peer reviewed, 2018)Scanning precession electron diffraction and automated crystal orientation mapping in a transmission electron microscope (TEM) have been applied to quantitatively study the crystal orientation of precipitate free zones ... -
Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy
(Journal article; Peer reviewed, 2017)The phase transformation in the plate-like precipitates of Al6Mn in an AA3004 Al-Mn based alloy, which was prepared by a chemical extraction technique, was investigated using transmission electron microscopy. The boiling-phenol ... -
Study on properties and precipitation behavior of 6000 series alloys with high Mg/Si ratios and Cu contents
(Peer reviewed; Journal article, 2022)A combination of high Cu and excess Mg contents has previously shown excellent effects on suppressing the natural aging (NA) and enhancing the precipitation strengthening response during artificial aging (AA) of Al-Mg-Si-Cu ... -
Tailoring microstructure and texture of annealed Al-Mn alloy through the variation of homogenization and prior cold deformation strain
(Peer reviewed; Journal article, 2020)The grain structures and crystallographic textures desired for various applications of aluminium alloys are usually modified by recrystallization during annealing. In this study, the interactions between recrystallization ... -
Texture evolution of an Al-8Zn alloy during ECAP and post-ECAP isothermal annealing
(Journal article; Peer reviewed, 2019)In this work, the texture evolution of an Al-8 wt% Zn alloy during equal channel angular pressing (ECAP) and post-ECAP isothermal annealing was systematically investigated by electron backscatter diffraction (EBSD). Special ... -
The effect of iron and the precipitation behavior of iron during annealing of a cold deformed commercial purity aluminium alloy
(Journal article; Peer reviewed, 2017)Iron is always present in any aluminium alloy and usually as an impurity element. In commercial purity alloys the concentration of iron is typically so large that iron has a strong influence on the material properties, due ...