Browsing Institutt for materialteknologi by Title
Now showing items 998-1017 of 2615
-
Formation and evolution of the interfacial structure in Al/steel compound castings during solidification and heat treatment
(Peer reviewed; Journal article, 2020)In this work, Al7SiMg/steel compound castings were produced through a low-pressure die casting process. All steel inserts were galvanized, where half of them were flux-coated to further improve the wettability and remove ... -
Formation and growth of crystal defects in directionally solidified multicrystalline silicon for solar cells
(Doktoravhandlinger ved NTNU, 1503-8181, Doctoral thesis, 2008) -
Formation mechanism and growth of MNbO3,M=K, Na by in situ X-ray diffraction
(Journal article; Peer reviewed, 2017)Hydrothermal synthesis is a well-established method to produce complex oxides, and is a potential interesting approach to synthesize stoichiometric lead-free piezoelectric K0.5Na0.5NbO3. Due to challenges in obtaining the ... -
Formation of aluminium carbide in Hall-Héroult electrolysis cell environments
(Journal article; Peer reviewed, 2018)The formation and dissolution of aluminium carbide under conditions similar to the chemical and electrochemical environments in the Hall-Héroult process were studied in laboratory cells, including cells with reversed ... -
Formation of Carbon Build-Up on the Flue Wall of Anode Baking Furnace
(Journal article; Peer reviewed, 2017)A hard carbon build-up layer often forms on the flue wall surface in anode baking furnaces. The layer accumulates over thermal circles and needs to be mechanically removed regularly to ensure sufficient space for the anodes ... -
Formation of Copper–Neodymium Intermetallic Compounds by Carbothermic Reduction of Neodymium Oxide in the Presence of Copper
(Journal article; Peer reviewed, 2018)Carbothermic reduction of neodymium(III) oxide (Nd2O3) was performed by arc melting and in a graphite resistance furnace, using copper as a solvent metal. Successful carbothermic reduction was evident by formation of ... -
Formation of Dislocation Arrays from CSL-type Grain Boundaries in Solar Silicon
(Master thesis, 2019)Fotovoltaisk solenergi er allerede en av de store fornybare energikildene og forventes å være en av de viktigste energiteknologiene i en bærekraftig fremtid. Solceller basert på multikrystallinsk silisium har vært en ... -
Formation of Hard Grey Scale (HGS) on the Surface of a Cold-finger in the Aluminium Production Industry
(Doctoral theses at NTNU;2021:183, Doctoral thesis, 2021)The present work has investigated the formation mechanisms of Hard Grey Scale (HGS) in a duct transporting the off-gas from aluminium production pot cells to the Gas Treatment Centre (GTC). For that purpose, a cooled fouling ... -
Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy
(Journal article; Peer reviewed, 2015)Deformation twinning has rarely been observed in coarse grained Al and its alloys except under some extreme conditions such as ultrahigh deformation strain or strain rates. Here, we report that a significant amount of Σ3 ... -
Formation of Primary Silicon and its Influence on the Eutectic Solidification in Unmodified Hypoeutectic Al-Si Alloys - Investigation of Orientation Relationships by EBSD
(Master thesis, 2018)Nucleation and growth of the primary and eutectic silicon in unmodified hypoeutectic Al-Si alloy have been investigated for via optical microscopy, EBSD and SEM . The influence of the cooling rate and phosphorus concentration ... -
Formation of Silicon Carbide and Graphite in the Silicomanganese Process
(Master thesis, 2012)When a liquid SiMn alloy is cooled, carbon is dissolved from the melt. The dissolved carbon either forms graphite or reacts with silicon from the melt to form SiC. The goal of this thesis has been to determine how temperature ... -
Formation of Silicon Carbide in the Silicomanganese Process
(Master thesis, 2011)As the silicon content in a silicomanganese alloy increase, silicon carbide becomes the stable carbon phase. Little work is published on the formation of silicon carbide in the SiMn process. This thesis examines the formation ... -
Formation of {11-21} twin boundaries in titanium by kinking mechanism through accumulative dislocation slip
(Journal article; Peer reviewed, 2016)The twinning behavior and kinking behavior of a commercial purity Ti subjected to room temperature dynamic plastic deformation (DPD) has been studied. Three types of deformation twins, {1012}, {1122} and {1121}, have been ... -
Formation of Σ3{110} incoherent twin boundaries through geometrically necessary boundaries in an Al-8Zn alloy subjected to one pass of equal channel angular pressing
(Journal article, 2018)For coarse grained (CG) alloys with high stacking fault energies (SFEs), like aluminum, deformation twins can rarely form. Here, we report that Σ3{110} incoherent twin boundaries (ITBs) could be generated in a CG Al-8Zn ... -
Fracture modes in naturally aged aluminium alloys and an investigation of accelerated age hardening by incremental stretching
(Master thesis, 2023)En tidligere undersøkelse av effekten av syklisk elding på 7xxx aluminiumslegeringer fra flate ekstruderte profiler fant at både naturlig elding og visse kombinasjoner av syklisk elding førte til tidlige duktile skjærbrudd ... -
The fracture toughness of Mg2Si determined by 3-point bending and the indentation microcracking method
(Peer reviewed; Journal article, 2022)The Mg2Si intermetallic compound was produced from the raw materials by melting in a vacuum furnace. The purity of the as-cast material was 98 vol.%. Continuous polishing of a surface containing microhardness indentation ... -
Free, flexible and fast: Orientation mapping using the multi-core and GPU-accelerated template matching capabilities in the Python-based open source 4D-STEM analysis toolbox Pyxem
(Peer reviewed; Journal article, 2022)This work presents the new template matching capabilities implemented in Pyxem, an open source Python library for analyzing four-dimensional scanning transmission electron microscopy (4D-STEM) data. Template matching is a ... -
Freeze casting of piezoelectric BCZT for biomedical applications
(Master thesis, 2019)Bruken av piezoelektriske keramer som beinimplantat gir muligheten til å forsterke heling av skadet bein gjennom elektrisk stimulering in vivo. På denne måten kan rekonvalesenstiden og sannsynligheten for revisjonsutskiftninger ... -
Freeze-drying of NMC cathodes for Li-ion batteries
(Master thesis, 2023)I denne masteroppgaven ble frysetørking evaluert som en potensiell tørkemetode i produks- jon av NMC622 katoder. Det ble produsert testkatoder via frysetørking og referanseelektroder via vakuum-ovn tørking. Katodene ble ... -
Freezing solute atoms in nanograined aluminum alloys via high-density vacancies
(Peer reviewed; Journal article, 2022)Low-temperature decomposition of supersaturated solid solution into unfavorable intergranular precipitates is a long-standing bottleneck limiting the practical applications of nanograined aluminum alloys that are prepared ...