Blar i Institutt for maskinteknikk og produksjon på emneord "Produktutvikling og produksjon, Materialer"

Viser treff 1-14 av 14

    • Acoustic Emission from Arctic Steels 

      Larsen, Andreas Vrenne (Master thesis, 2015)
      As the search for hydrocarbons moves into the Arctic regions new materials are required to meet the new challenges due to the harsh environment. Arctic Materials 2, is a cooperation between SINTEF, NTNU, DNV GL, several ...

    • Acoustic Emission from Arctic Steels and Fractographic Investigations 

      Hartwig, Cathrine Gjerstad (Master thesis, 2015)
      There is a need for better understanding of brittle fracture due to an increased interest in exploring the undiscovered hydrocarbon resources in the arctic region. There is also a need for development of steels with better ...

    • Analysis of camshaft gear transmission for a ship engine 

      Closs, Katrine Fosdal (Master thesis, 2015)
      This thesis investigates the dynamic behavior of a spur gear pair. The gears studied are somewhat similar to the ones found in Bergen Engines medium-speed diesel engine with regards to design, but some assumptions have ...

    • Development of a Linear Tribometer 

      Fenre, Mathis Dahl (Master thesis, 2016)
      A mobile, linear tribometer for studying frictional characteristics on various materials gliding on snow and ice has been developed. The tribometer has the ability to adjust the normal force on the specimen to simulate ...

    • Dimensjonering, analyse og testing av inserts i karbonfiber kompositt sandwich chassis 

      Haugum, Henrik; Pløen, Morten (Master thesis, 2014)
      I arbeidet med denne avhandlingen har det blitt utført et omfattende arbeid på ulike aspekter ved utviklingen av et monocoque chassis designet for å konkurrere i Formula Student. Analyse, dimensjonering og produksjon er ...

    • Mekanisk analyse av kamaksling på en skipsmotor 

      Sunde, Steffen (Master thesis, 2015)
      Dette prosjektet er et studium av den dynamiske adferden til en medium-speed diesel motor kamaksel. Kamakselen er en viktig komponent i stempelmotoren og blir utsatt for stadig høyere belastninger på grunn av økende krav ...

    • Modeling of Fatigue from Random Corrosion Pits 

      Sirevaag, Fredrik Øgård (Master thesis, 2015)
      This master thesis is a continuation of the project work Fatigue Assessment of Mechanical Components with Random Surface Defects written during the fall of 2015. Central tasks of this report has been to create a manual ...

    • MODIFISERT PAKNING FOR ARKTISKE BETINGELSER 

      Nergård, Katrine Linnea (Master thesis, 2015)
      Arktis er anslått til holde verdens største gjenværende uutnyttede olje- og gassreserver. Oljesøl utgjør en enorm risiko for arktiske økosystemer. Som et resultat av dette at er et behov for forbedret tetningsteknolgi ...

    • MODIFISERT PAKNING FOR ARKTISKE BETINGELSER 

      Nergård, Katrine Linnea (Master thesis, 2015)
      Arktis er anslått til holde verdens største gjenværende uutnyttede olje- og gassreserver. Oljesøl utgjør en enorm risiko for arktiske økosystemer. Som et resultat av dette at er et behov for forbedret tetningsteknolgi ...

    • Next Generation Submerged Pressure Transmitter - Product Development for Kongsberg Maritime 

      Foshaug, Maria Nissrin (Master thesis, 2015)
      Development of the next generation pressure sensor for kongsberg Maritime

    • Numerical and experimental characterization of a rubber damping tool component 

      Hårberg, Eivind Wibe (Master thesis, 2015)
      As computer technology develops, one can simulate more complex systems by using CAE-software. Sandvik Teeness, a world leading manufacturer of damped machining tools, wants to investigate the possibility of utilizing CAE ...

    • Optimization of nozzles and branches welded to pressure vessels or pipes used in chemical processing plants 

      Hålien, Werner (Master thesis, 2015)
      The master project was ready to start in mid-February, so some time was lost in the beginning. The company, Cambi prepared a workstation for me in their office in Asker. The work started with reading about the problem and ...

    • Stress Concentrations and Stress Gradients at Elliptical Through-Holes and Spheroidal Cavities 

      Klungerbo, Kristine (Master thesis, 2016)
      The effect of thickness and Poisson's ratio on the stress concentration factor and the stress gradient at the notch root of central elliptical through-holes in plates are systematically investigated using three-dimensional ...

    • Tribocorrosion of Diamond Like Carbon (DLC) coatings for biomedical applications 

      Sanchez Adam, Jorge (Master thesis, 2015)
      Tribocorrosion has arisen as one of the most important material degradation processes in biomedical applications; thus, the improvement of the materials used in hip or knee prosthesis is very relevant. The aim of this ...