Blar i Institutt for maskinteknikk og produksjon på emneord "Produktutvikling og materialer"
Viser treff 1-20 av 29
-
DESIGN AV NACELLE FOR EN 10 MW VINDTURBIN
(Master thesis, 2012)En løsning for to hoved lager og en bunnplate for NOWITECH 10MW referanse turbinen er foreslått basert på dimensjonering i henhold til ekstremlaster. Ekstremlastene er basert på ekstrapolerte laster under vanlig strøm ... -
Design For Performance
(Master thesis, 2012)1.1 Strukturen av den integrerte HT-vurderingen Konklusjonen av del én av denne oppgaven var at HT-vurderingen bør inngå som en parallell del av konseptutviklingen, som en integrert del av detaljdesignfasen og som et eget ... -
Design of Rotor Hub for NOWITERCH 10 MW Reference Wind Turbine
(Master thesis, 2012)The main goal in this master thesis has been to develop an engineering design and dimensioning the hub and rotor shaft for the NOWITECH reference wind turbine. A pitching mechanism concept has presented as well. The major ... -
Developing Software Quality in KBE Implementations
(Master thesis, 2012)The report is written to show as to what extent test-driven development (TDD) and continuous integration (CI) can be used on KBE models and how a unit testing framework for KBE models can be developed.Test-driven development ... -
Development and construction of car for eco-marathon for participation in competition: Verification,Validation and Testing activities for the DNV Fuel Fighter 2
(Master thesis, 2012)The goal of this Thesis is to verify a winning solution for the DNV Fuel Fighter 2, the verification of the design and development will be achieved by a series of verification, validation and testing activities.The Literature ... -
Development and Construction of Vehicle for Participation in the Shell Eco-marathon Competition
(Master thesis, 2012)A team of 13 NTNU students have developed and built a car to compete in the Shell Eco-Marathon 2012 competition. This master project is a continuation of the specialization project done in the autumn semester 2011. Production ... -
Development of car for Eco-marathon
(Master thesis, 2012)The objective of this project has been to develop the front suspension and certain parts of the in-wheel motor of NTNU’s new car for Shell Eco-marathon, as well as assisting other team members. NTNU has participated in the ... -
Development of environmentally friendly chair concept
(Master thesis, 2012)The governing purpose of the thesis is to develop a chair concept based on a tilting mechanism called VAPAC. This chair concept has many potential ergonomic and environmental benefits that should be included and developed ... -
Dimensjonering, analyse og testing av inserts i karbonfiber kompositt sandwich chassis
(Master thesis, 2014)I arbeidet med denne avhandlingen har det blitt utført et omfattende arbeid på ulike aspekter ved utviklingen av et monocoque chassis designet for å konkurrere i Formula Student. Analyse, dimensjonering og produksjon er ... -
Drivere for stabilisering innenfor Lean produktutvikling: Identifisering av organisatoriske og operasjonelle faktorer som påvirker prestasjoner
(Master thesis, 2014)SammendragGjennom de senere årene har bedrifter forsøkt å øke sin konkurranseevne ved å implementere prinsipper fra lean i sine produktutviklingsprosesser. For å oppnå et suksessfullt resultat av slike tiltak er det viktig ... -
Fatigue properties of adhesive joints in composite patch repair
(Master thesis, 2012)This paper is a master thesis written at NTNU for the Co-Patch project. The Co-Patch project is an EU-funded consortium of 15 organizations from 8 different countries, developing a standard for composite patch repair of ... -
GROWTH AND PROPERTIES OF CARBON NANOTUBES
(Master thesis, 2012)An experimental study of Carbon Nanotube (CNT) growth has been performed by using radio frequency plasma enhanced chemical vapour deposition with methane (CH4) as the hydrocarbon source. The experimental results have been ... -
Implementing Lean Systems Engineering in the DNV Fuel Fighter project
(Master thesis, 2012)This thesis is a practical application of Systems Engineering in a full-scale project. The author has participated as a member of NTNU's Eco-marathon team, who has spent the last two semesters designing and manufacturing ... -
INSPEKSJONSROBOT FOR HØYSPENTLINER
(Master thesis, 2012)Fokuset på denne oppgaven har vært å designe en inspeksjonsrobot som vil kunne realiseres og en dag kunne sendes til produksjon. Det har derfor blitt lagt vekt på at ting skal kunne fungere, og ingen snarveier har blitt ... -
Integration Tools for Design and Process Control of Filament Winding
(Master thesis, 2012)Filament winding is a fabrication method for composite material structures, in which fibres are wound around a rotating mandrel. It is a versatile and dexterous process especially well-suited for creating and optimizing ... -
Karbonfiberfelger til Formula Student
(Master thesis, 2014)Formula Student er en rekke ingeniørstudent konkurranser med røtter som strekker seg tilbake til 1978. Konkurransene går ut på å designe, bygge, teste og konkurrere med en en-seters formel bil. Revolve NTNU stiller i 2014 ... -
LIFE PREDICTION FOR HEAVY STRUCTURES BASED ON FATIGUE CRACK INITIATION AND GROWTH
(Master thesis, 2012)The main goal for this thesis has been to perform fatigue life predictions on large components.Dierent methods were to be chosen and reviwed critically. Experimental datafor girth welded pipes was assessed by means of a ... -
Nanomekanisk prøving av stål: Er mindre alltid sterkere?
(Master thesis, 2012)Gjennom dette arbeidet, er nanomekaniske kompresjonsegenskaper undersøkt for tre forskjellige materialer: To stål legeringer og et renjern. Pillarer av varierende størrelse, fra diameter 100nm til 2um, er fabrikkert ved ...