Browsing Institutt for maskinteknikk og produksjon by Title
Now showing items 702-721 of 3970
-
Contribution to reliability and availability analysis of novel subsea technologies - Methods and approaches to apply in the early design phase
(Doctoral theses at NTNU;2018:387, Doctoral thesis, 2018) -
Contributions to the safety of novel subsea technologies - Methods and approaches to support the safety demonstration process
(Doctoral theses at NTNU;2022:47, Doctoral thesis, 2022)This PhD thesis explains the contributionmade to the safety of novel subsea technologies. It is supported by this thesis objective, which is to develop and demonstrate the application of new safety assessment methods within ... -
Control and Sensor Systems for Offshore and Aquaculture Cranes
(Master thesis, 2021)Ettersom offshore industrien er like viktig i dag som tidligere, er det nødvendig med ny og forbedret teknologi for å håndtere mulige problemer som kan oppstå. Derfor vil vi igjennom denne oppgaven se på muligheten for å ... -
Control Model for Intelligent and Demand-Driven Supply Chains
(Chapter, 2011)Orchestrating supply chains is challenging. This chapter describes how to control a supply chain to make it truly demand-driven – based on the assumption that all relevant information is made available to all partners in ... -
A Control System for Autonomous Vehicles - Kinematics for a Control System
(Master thesis, 2017)The GeoMod software offers visualization and simulation for geometric models. The software is developed as independent modules which incorporate into a system. This thesis presents the development of a control system ... -
Controller and observer design for first order LTI systems with unknown dynamics
(Chapter, 2018)The design of controllers and observers often relies on first order models of the system in question. These models are often obtained either through step-response tests, through on-line or off-line identification, or through ... -
Controller Design and Control Structure Analysis for a Novel Oil–Water Multi-Pipe Separator
(Journal article; Peer reviewed, 2019)To enable more efficient production of hydrocarbons on the seabed in waters where traditional separator equipment is infeasible, the offshore oil and gas industry is leaning towards more compact separation equipment. A ... -
Controlling Fronius welding machine with a Computer through Ethernet and DeviceNet.
(Master thesis, 2023)Å programmere robotisert sveising av komplekse deler gjennom en robotkontroller byr på betydelige utfordringer. Integreringen av roboten i ROS2 forenkler programmeringsprosessen, noe som gjør simulering og planlegging av ... -
Conventional or additive manufacturing for spare parts management: An extensive comparison for Poisson demand
(Peer reviewed; Journal article, 2021)Due to the main peculiarities of spare parts, i.e. intermittent demands, long procurement lead times and high downtime costs when the parts are not available on time, it is often difficult to find the optimal inventory ... -
Convolutional Neural Networks for Filtering Reflections in Laser Scanning Systems
(Master thesis, 2021)Robotsveising og kvalitetskontroll krever nøyaktige 3D målinger av arbeidsstykkene. Strukturert lys er en utbredt metode for å ta disse målingene, men for reflektive materialer som aluminium, kan refleksjoner forårsake ... -
Coordinating an engineer-to-order supply chain: A study of shipbuilding projects
(Doctoral thesis at NTNU;2015:69, Doctoral thesis, 2015)project activities, use of innovative systems, and disintegration of engineering and production contribute to increase the coordination effort required. Thus, the coordination mechanisms adopted to manage the engineering ... -
Coordination Between Teams in Agile Projects
(Master thesis, 2015)The way many software projects are managed have changed dramatically due to the introduction of agile methods. This shift was influences by the fact that technology and the IT-industry itself are moving rapidly and projects ... -
Coping with Verification in Complex Engineered Product Development
(Peer reviewed; Journal article, 2023)Coping with system verification in complex systems is a challenging task. This paper reports on how the high complexity of closely integrated systems and long timelines in development affects the verification process in ... -
Core-shell nanofibers for developing self-healing materials: Recent progress and future directions
(Peer reviewed; Journal article, 2021)The knowledge of self-healing was developed to ensure more durable and reliable engineering materials. Healing agent encapsulation has shown to be one of the most promising approaches in self-healing technology. The healing ... -
Core‐shell nanofibers for developing self‐healing materials: Recent progress and future directions
(Peer reviewed; Journal article, 2019)The knowledge of self‐healing was developed to ensure more durable and reliable engineering materials. Healing agent encapsulation has shown to be one of the most promising approaches in self‐healing technology. The healing ... -
Corporate Sustainability Assessment Method Development Using Systems Approach: Addressing the contribution of manufacturing companies to SDGs
(Doctoral theses at NTNU;2018:398, Doctoral thesis, 2018)Launched in 2015, 17 Sustainable Development Goals (SDGs) became the latest conceptualization of sustainable development (SD). Since then, international institutions and researchers have been eager to find means to (1) ... -
Corrosion and Cathodic Protection of PMM Propellers
(Master thesis, 2018)This thesis will examine the effect of water flow on cathodic protection (CP) of AISI 316L Stainless Steel (SS) and Nickel-Aluminium bronze (NAB). It will also examine the effect water flow has on the galvanic current of ... -
Corrosion and Microstructural Investigation on Additively Manufactured 316L Stainless Steel: Experimental and Statistical Approach
(Peer reviewed; Journal article, 2022)The use of metal additive manufacturing (AM) has strongly increased in the industry during the last years. More specifically, selective laser melting (SLM) is one of the most used techniques due to its numerous advantages ... -
Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding
(Peer reviewed; Journal article, 2022)In this study, corrosion and wear behavior of three kinds of coatings by two processes, namely, plasma electrolytic oxidation (PEO) coatings (Ti/TiO2), gas nitriding coating (Ti/TiN), and the duplex coating (Ti/TiO2-N) by ... -
Corrosion and wear protection of wheel axles on trains
(Master thesis, 2016)Wheel axles are critical components on the train, and subjected to strict inspections and maintenance. With its placement underneath the train units, they are naturally susceptible of shocks and impact loads from ice, snow, ...