• Mechanical Twinning is a Correlated Dynamic Process 

      Vinogradov, Alexey; Agletdinov, E; Merson, D (Journal article; Peer reviewed, 2019)
      Plastic deformation and fracture of materials is accompanied by generation of elastic wave transients known as acoustic emissions (AE). A novel complex methodology combining the statistical analysis of distributions of ...
    • Mechanism of Yellowing: Carbonyl Formation during Hygrothermal Aging in a Common Amine Epoxy 

      Krauklis, Andrejs; Echtermeyer, Andreas (Journal article; Peer reviewed, 2018)
      Epoxies are often exposed to water due to rain and humid air environments. Epoxy yellows during its service time under these conditions, even when protected from UV radiation. The material’s color is not regained upon ...
    • Mechanism parametrization, modeling and FE-meshing 

      Skaare, Rasmus Korvald (Master thesis, 2015)
      This thesis is written to show the development of an application used for mechanism parametrization, modeling and finite element meshing. Concepts from Knowledge Based Engineering (KBE) are applied and the possibility of ...
    • Mechanisms for Manufacturing Systems 

      Holtskog, Halvor; Ringen, Geir (Journal article; Peer reviewed, 2018)
      Production systems have continuously evolved since early attempts to standardise parts, processes and work modes to enhance mass production. This was further refined by the Japanese automotive industry, which has been the ...
    • Medical Supplies to the Point-Of-Use in Hospitals 

      Fragapane, Giuseppe; Bertnum, Aili Biriita; Hvolby, Hans-Henrik; Strandhagen, Jan Ola (Chapter, 2019)
      In order to match financial sustainability with the delivery of high-quality healthcare hospitals need to seek efficient ways of managing inventories with a large variety of medical supplies. To find a balance in the ...
    • Medical Supplies to the Point-Of-Use in Hospitals 

      Fragapane, Giuseppe; Bertnum, Aili Biriita; Hvolby, Hans-Henrik; Strandhagen, Jan Ola (Chapter, 2019)
      In order to match financial sustainability with the delivery of high-quality healthcare hospitals need to seek efficient ways of managing inventories with a large variety of medical supplies. To find a balance in the ...
    • Medium to high cycle fatigue investigation on hot dip galvanized structural steel welded joints 

      Viespoli, Luigi Mario; Mutignani, Francesco; Berto, Filippo (Journal article; Peer reviewed, 2019)
      Hot dip galvanization offers stable and lasting corrosion protection to steel structure, both acting as a barrier for external agents and inducing galvanic protection, through the deposition of a thin layer of zinc on the ...
    • Medium-scale Tests to Investigate the Possibility and Effects of BLEVEs of Storage Vessels Containing Liquified Hydrogen 

      van Wingerden, Kees; Kluge, Martin; Habib, Abdel Karim; Ustolin, Federico; Paltrinieri, Nicola (Peer reviewed; Journal article, 2022)
      Experiments have been performed to determine the consequences of a storage vessel containing liquified hydrogen (LH2) is engulfed by a fire. The tests were performed at the Test Site Technical Safety of the Bundesanstalt ...
    • Mekanisk analyse av kamaksling på en skipsmotor 

      Sunde, Steffen (Master thesis, 2015)
      Dette prosjektet er et studium av den dynamiske adferden til en medium-speed diesel motor kamaksel. Kamakselen er en viktig komponent i stempelmotoren og blir utsatt for stadig høyere belastninger på grunn av økende krav ...
    • Mekanisk design av et koaksialt fremdriftssystem for en drone 

      Glimo, Magnus Bjørshol; Kvale, Jostein Rodahl; Øen, Anders (Bachelor thesis, 2022)
      Abstract will be available on 2023-05-30
    • Mekanisk design av jernløse elektriske motorer for luft- og maritime droner 

      Aarhus, Arne; Ulvin, Jon Kristian; Taamori, Alaa Imad (Bachelor thesis, 2021)
      Abstract will be available on 2023-07-01
    • Mekanisk og arkitektonisk designstudie av en hyperspektral nyttelast for en 6U CubeSat platform 

      Galtung, Henrik (Master thesis, 2019)
      Arbeidet som presenteres i denne oppgaven viser utviklingen av et hyperspektral kamera og tilhørende nyttelaster ombord på en CubeSat eid av HYPSO-prosjektet. Avhandlingen fungerer som et cover for en pakke med tekniske ...
    • Mekanisk utforming og konstruksjon av batterikassen til Revolve NTNUs 2016 Formula SAE-bil 

      Loland, Kjetil Bru (Master thesis, 2016)
      Masteroppgaven tar for seg utviklingen av batterikassen til Revolve NTNUs firehjulsdrevne helelektriske racerbil. Oppgaven inneholder en lett gjennomgang av det mekaniske designet av batteripakken, med blant annet plasseringen ...
    • Mekaniske egenskaper til beleggsystemer for offshore vindturbin 

      Bastiko, Arya Priambodo (Master thesis, 2012)
      De seneste årene er det oppdaget slitasjeskade på offshorevindturbinenes fortøyningsplass, hvor båter kommer inntil for på og avlastning av drift og vedlikeholdspersonell. Hensikten med denne oppgaven er å se på beleggenes ...
    • Messing with boundaries - quantifying the potential loss by pre-set parameters in topology optimization 

      Tyflopoulos, Evangelos; Steinert, Martin (Journal article; Peer reviewed, 2019)
      Additive manufacturing can increase the flexibility in the design phase of product development and that, in its turn, has changed the designer’s way of thinking. The design problem has reformulated; from designs that were ...
    • Meta-learning for Safety Management 

      Paltrinieri, Nicola; Patriarca, Riccardo; Stefana, Elena; Brocal, Francisco; Reniers, Genserik (Peer reviewed; Journal article, 2020)
      The experience gathered from normal industrial operations allows us to associate its degrading conditions with the potential for an accident. Such association is the basis for the definition of the system risk and appropriate ...
    • Meta-Learning Potential to Assess Uncertainties in Dynamic Risk Management 

      Stefana, Elena; Paltrinieri, Nicola (Chapter, 2020)
      Meta-learning studies how learning systems can increase in efficiency through experience. Its purpose is to understand how learning itself can become flexible according to the tasks or contexts under study. These properties ...
    • Metal additive manufacturing in aerospace: A review 

      Blakey-Milner, Byron; Gradl, Paul; Snedden, Glen; Brooks, Michael; Pitot, Jean; Lopez, Elena; Leary, Martin; Berto, Filippo; Du Plessis, Anton (Journal article; Peer reviewed, 2021)
    • Metal forming of titanium in cold, warm and hot condition 

      Eide, Amund (Master thesis, 2010)
      The thesis starts with a presentation of the basic concepts used to investigate the properties of the material. The material certificate is presented, and some of the most central aspects are discussed. Next the central ...
    • Metal Penetration in Additively Manufactured Venting Slots for Low-Pressure Die Casting 

      Hovig, Even Wilberg; Sørby, Knut (Journal article; Peer reviewed, 2018)
      Venting of excess gas and air in casting moulds is of critical importance to avoid defects such as misruns and porosities. Additive manufacturing give mould designers a possibility to make venting slots in large areas and ...