• Eurobot NTNU 2012: Treasure Island 

      Halvorsen, Are; Myren, Sindre Røkenes; Sperre, Andreas Hopland (Master thesis, 2012)
      Eurobot is an annual competition for autonomous robots. Typically two teams compete against each other for 90 seconds on a 2x3m playing area. The main goal is to collect as many points as possible. There are several matches ...
    • Extended Bubble Razor Methodology and its Application to Dynamic Voltage Frequency Scaling Systems 

      Kollerud, Martin Taugland (Master thesis, 2013)
      Increasing voltage and frequency margins in traditional worst-case designs will be more dominating as the process technology is scaled, where power is wasted in exchange for production yield. We have investigated a ...
    • Fast and Accurate Edge Computing Energy Modeling and DVFS Implementation in GEM5 Using System Call Emulation Mode 

      Yassin, Yahya Hussain; Jahre, Magnus; Kjeldsberg, Per Gunnar; Aunet, Snorre; Catthoor, Francky (Peer reviewed; Journal article, 2021)
      Stringent power budgets in battery powered platforms have led to the development of energy saving techniques such as Dynamic Voltage and Frequency scaling (DVFS). For embedded system designers to be able to ripe the benefits ...
    • Force measurement using a capacitive sensor and a compressible material 

      Stubsjøen, Sivert (Master thesis, 2018)
      Disruptive Technologies are developing sensor solutions for the Internet of Things. Their current sensors can measure touch, temperature, and proximity. To expand the area of applications their current sensors cover, new ...
    • FPGA Implementation and Evaluation of a Genetic Algorithm for Digital Adaptive Nulling using Space-Time Adaptive Processing. 

      By, Mathias (Master thesis, 2015)
      By using multiple antennas it is possible to do beam forming of signal reception. Each antenna signal is scaled and delayed before they are added together. By scaling and delaying the signals from various antennas differently, ...
    • Full-Custom Sub-/Near-Threshold Cell Library in 130nm CMOS with Application to an ALU 

      Johnsen, Glenn André (Master thesis, 2014)
      This thesis presents a cell library with limited functionality targeting to operate in sub-threshold (350mV) as well as above-threshold (1.2V) voltages utilizing the dynamic speed requirement of the circuit. The sub-threshold ...
    • High Level Power Modeling for IoT 

      Jenab Mahabadi, Zahra (Master thesis, 2023)
      Dette masterprosjektet fokuserer på å utvikle en allsidig tilnærming for å muliggjøre strømestimering for en programvaremodell, vanligvis referert til som en virtuell prototyp, som representerer målsystemet. Det overordnede ...
    • High Level Power Modelling for IoT 

      Overholt, Ingvild Una Sundsby (Master thesis, 2023)
      Målet for denne masteroppgaven er å modellere effektforbruket til et system på en chip på elektronisk systemnivå ved å bruke effekt- og ytelsesmodelleringsverktøyet Fused. Motivasjonen bak prosjektet er å få et estimat på ...
    • Humidity sensor 

      Helle, Even Rørstad (Master thesis, 2018)
      Disruptive Technologies(DT) has a sensor that is able to measure touch and proximity by monitoring change in capacitance. This work investigates the possibility of using the sensor for Relative humidity(RH) measurements. ...
    • Implementation and Comparison of Digital Arithmetics for Low Voltage / Low Energy Operation 

      Holen, Aslak Lykre (Master thesis, 2015)
      This thesis compares digital arithmetic circuit implementations in a 28nm FD-SOI technology of an earlier solution done in a 65nm bulk CMOS technology. The design is a 16-operand adder circuit with 9-bit operands working ...
    • Lav effekt sensornettverk, for registrering av kjøretøy 

      Hals, Erik (Master thesis, 2015)
      Denne prosjektoppgaven omhandler design og implementasjon av et lavenerginettverk bestående av parkeringssensorer. Dataen som skal sendes vil være om det er en bil parkert på parkeringsplassen, eller ikke. Systemet vil ha ...
    • Low Energy Implementation of Robust Digital Arithmetic in Sub/Near-Threshold Nanoscale CMOS: For Ultrasound Beamforming 

      Schjolden, Lars-Frode (Master thesis, 2013)
      This thesis will show combinatorial digital design using the 65nm transistor technology operating in near/sub-threshold region. Designing a 16By9Bit adder optimized with regard to power consumption with a speed requirement ...
    • Low Power Capacitive Touch Digital Detection Filter: A Comparative Study of Synchronous and Asynchronous Methodologies 

      Gulbrandsen, Truls Magnus Aamodt (Master thesis, 2012)
      In this thesis, both synchronous and asynchronous methodologies is explored for implementing a capacitive touch digital detection filter circuit.Asynchronous methodologies promise characteristics such as lower power, higher ...
    • Low Power Electronic Paper Display Driver with Unipolar Driving Waveform 

      Asp, Mattis Spieler (Master thesis, 2017)
      Electronic paper display (EPD) has reached a position of great maturity. Due to its capability of bistability and great reflectivity, it can display an image without any flowing current. Today, sensors and regulators are ...
    • Low Power Environmental Air Quality Monitoring 

      Boland, Connor (Master thesis, 2019)
      Måling av personlig miljøluftkvalitet blir stadig mer relevant i dagens samfunn. Tradisjonell overvåking krever overdimensjonerte, dyre instrumenter, med langsomme og intensive prøvetakingsmetoder. Skalerbare, lavprismonitorer ...
    • Low Voltage Logic and Memories on Silicon 

      Låte, Even (Doctoral theses at NTNU;2021:161, Doctoral thesis, 2021)
      Data centers, sensor nodes in the internet of things, and handheld devices are all systems that require energy efficiency and low power operation to reduce electricity cost, fit within power budgets of energy harvesters, ...
    • Low-Power Neuromorphic Sound Source Localization 

      Moulin, Kaspar Sigurd (Master thesis, 2021)
      I denne hovedoppgaven presenterer vi et neuromorft system for lydkildelokalisering basert på Jeffress sin lokaliseringsmodell. Systemet bruker nevral spike-koding og asynkrone delay-linjer for a beregne krysskorrelasjonen ...
    • Modelling of Cache/Interconnect Performance in an Embedded System 

      Nielsen, Øivind Auseth (Master thesis, 2021)
      Cache og bus topologi i et innvevd system har en stor innflytelse på systemets ytelse og energi effektivitet. Å produsere en ny chip for testing er dyrt, og dette har gjort simulering av arkitektur forandrnger til en vanlig ...
    • Multi-dimensional exploration of the Minimum Energy Point for RISC-V subsystem in 22 nm FDSOI 

      Guarecuco Aguiar, Daniel Eduardo (Master thesis, 2023)
      Battery operated devices are highly constraint in energy budget, there is a need for energy-efficient designs. Designing circuits to operate in the Minimum Energy Point (MEP) yields great energy savings, by at least 20%, ...
    • NIRCA MkII DevKit Firmware Development 

      Øfsti, Gjermund Sollien (Master thesis, 2024)
      NIRCA MkII Development Board(NM2DB) er en PCB med NIRCA MkII(NM2), en ASIC brukt til kontroll og utlesning av infrarøde sensorer. PCBen har også en Trenz FPGA "system-på-modul" brukt til kontroll av ASICen, LDOer og for ...