Cassie-Baxter and Wenzel States and the Effect of Interfaces on Transport Properties across Membranes

Abstract

Mass transfer across a liquid-repelling gas permeable membrane is influenced by the state(s) of the liquid–vapor interface(s) on the surface of the membrane, the pore geometry, and the solid–fluid interactions inside the membrane. By tuning the different local contributions, it is possible to enhance the temperature difference-driven mass flux across the membrane for a constant driving force. Non-equilibrium molecular dynamics simulations were used to simulate a temperature difference-driven mass flux through a gas permeable membrane with the evaporating liquid on one side and the condensing liquid on the other. Both sides were simulated for Wenzel- and Cassie–Baxter-like states. The interaction between the fluid and the solid inside the gas permeable membrane varied between the wetting angles of θ = 125° and θ = 103°. For a constant driving force, the Cassie–Baxter state led to an increased mass flux of almost 40% in comparison to the Wenzel state (given a small pore resistance). This difference was caused by an insufficient supply of vapor particles at the pore entrance in the Wenzel state. The difference between the Wenzel and Cassie–Baxter states decreased with increasing resistance of the pore. The condensing liquid–vapor interface area contributed in the same manner to the overall transport resistance as the evaporating liquid–vapor interface area. A higher repulsion between the fluid and the solid inside the membrane decreased the overall resistance.