Utvikling av demonstrator for frekvensrespons og vibrasjonsdempning
Description
Full text not available
Abstract
Bacheloroppgaven vil dokumenter utvikling av en fysisk demonstrator for frekvensrespons og vibrasjonsdemping tiltenkt bruk i undervisning. Demonstratoren skal bestå av en fysisk testrigg med tilhørende sensorer og hardware, koblet til og styrt av egenutviklet software. Oppgaven kan deles i to hoveddeler, der del én baserer seg på utvikling av den fysiske demonstratoren og valg av tilhørende hardware. Del to fokuserer på programmering av software i programmet LabVIEW. Sluttresultatet er utkast til en fysisk testrigg og tilhørende hardware og utkast til et softwareprogram for styring av tilkoblet hardware og analysering av sensordata. The aim for this bachelor thesis will be to document the development of a physical demonstrator for frequency response and vibration damping intended for educational use. The demonstrator must consist of a physical test rig with associated sensors and hardware, connected to and controlled by self-developed software. The task can be divided into two main parts, where part one is based on the development of the physical demonstrator and the choice of associated hardware. Part two focuses on programming software in the program LabVIEW. The end result is a draft for a physical test rig and associated hardware and a draft for a software program to control the connected hardware and analyze sensor data.