An Efficient Non-Inverting Buck-Boost Converter with Improved Step Up/Down Ability
Peer reviewed, Journal article
Published version
![Thumbnail](/ntnu-xmlui/bitstream/handle/11250/3039555/energies-15-04550.pdf.jpg?sequence=6&isAllowed=y)
View/ Open
Date
2022Metadata
Show full item recordCollections
- Institutt for elkraftteknikk [2474]
- Publikasjoner fra CRIStin - NTNU [38294]
Abstract
In this article, a new non-inverting buck-boost converter with superior characteristics in both bucking and boosting is presented. The proposed converter has some distinct features, such as high step-up/-down ability and low voltage/current stress on its switching devices. The voltage gain of the proposed converter is double the reported value for the traditional buck-boost converter. Although it has three switches, the three switches operate simultaneously, hence no dead-time is required. Two out of the three switches are under voltage stress equal to half of the output voltage. The overall efficiency of the system is promising because of the ability to select devices with low voltage drops. Converter analysis and steady-state performance in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM) are presented in detail. A 1 kW hardware prototype of the converter was implemented in the laboratory; with a step-up ratio of 3.5 and 1 kW power, the measured efficiency is above 95.4%, and with step-up ratio 8, it is around 91.5%. An Efficient Non-Inverting Buck-Boost Converter with Improved Step Up/Down Ability