Downhole errors
Abstract
En av de viktigste utfordringene i industrien i dag er å finne tiltak som kan redusere kostnad.En måte å gjøre dette på er å gjøre boreoperasjonen mer effektiv ved å fjerne kildene tilnedetid. Ved å fjerne kilden til en hendelse som hindret boreoperasjonen, blir ikke bare denassosierte utstyrskostnaden og driftskostnadene redusert, men også forsinkelsen på prosjektet.Å kunne vite den nøyaktige posisjonen til en brønn mens man borer, samtidige som manopprettholder styringskontroll, er fundamentalt i konstruksjonen av nye brønner. Metoder påhvordan man oppnår disse egenskapene har forandret seg oppigjennom årene og er understadig utvikling for å kunne nå nye hydrokarboner.Denne tesen baserer seg på rapportene og sann-tid boredata fra to brønner i Nordsjøen.Dataen ble analysert i et forsøk på å finne en sammenheng mellom årsakene til nedetidmanglende styring. Rapportene ble analysert sammen med sann-tids boredata for å oppnå enforståelse for brønnene og hendelsene i dem. Dataen måtte bli lest i et MATLAB programsom gjorde for å gjøre den lesbar og presentabel. De fleste hendelsene i brønnene er ikkedirekte tilknyttet styring. Hvis en feil finner sted og det blir urettmessig antatt at posisjonen tilbrønnen er korrekt, er det lettere å peke ut en annen kilde for feilen. One of the most important challenges in the industry today is finding ways to reduce cost.One approach is to make the drilling process more effective by eliminating sources of nonproductivetime. By removing the source of an event that delayed drilling operations, not onlyis the associated equipment damage and cost of operations reduced, but it also the removesthe delay on the project. The ability to simultaneously know the position of a well andmaintain directional control is fundamental in the construction of new wells. Methods on howto best achieve these two goals have changed through the years and are under furtherdevelopment to enhance the ability to reach hydrocarbons.This thesis is based on the reports and Real Time Drilling data from two wells in the NorthSea. The data was analysed in an effort to uncover a correlation between the events thatcaused Non-Productive time and the lack of directional control. Reports were analysedalongside the Real Time Drilling data to gain an understanding of the well and its events. Thedata required to be processed in a MATLAB script, enabling it to be read and presented. Mostof the events that took place in the wells are not directly corelated with directional control. Ifan error occurs and it is wrongfully assumed the positioning of the well is correct, othersources of the error are more easily pointed out as the obvious culprit.