Evolution in texture and its through-thickness variations in Al-Mg-Si-extrusions: experiments and modelling
Chapter
Accepted version
Åpne
Permanent lenke
http://hdl.handle.net/11250/2588733Utgivelsesdato
2018Metadata
Vis full innførselSamlinger
- Institutt for materialteknologi [2496]
- Publikasjoner fra CRIStin - NTNU [37219]
Sammendrag
The visual appearance and mechanical properties of aluminium alloy extrusions are strongly dependent on the microstructure and texture of the extruded profiles, where the desired microstructure and texture may depend on the specific applications. In the present work, the evolution of deformation as well as recrystallization textures during extrusion of AA6xxx aluminium alloys have been experimentally and numerically investigated. Extrusion trials were performed in a laboratory extrusion set-up, which enabled immediate water-quenching of the profiles at the exit of the die, and thus the possibility to capture the deformation texture prior to post-extrusion recrystallization. The textures and their through-thickness variations were experimentally measured by the electron back-scatter diffraction technique (EBSD, and the deformation textures numerically modelled by coupling FEM flow simulations and crystal plasticity (CP) simulations. Different CP models as well as different choices of model parameters were employed and evaluated for texture predictions. With an appropriate choice of crystal plasticity model and model parameters, the deformation texture can mainly be predicted, although the accurate intensities are hard to reproduce. The corresponding recrystallization textures, either generated through spontaneous recrystallization of the extruded profiles or through post-extrusion annealing, are far more challenging to reproduce with available recrystallization models.