dc.contributor.author | Gagani, Abedin | |
dc.contributor.author | Krauklis, Andrejs | |
dc.contributor.author | Echtermeyer, Andreas | |
dc.date.accessioned | 2018-03-23T09:23:54Z | |
dc.date.available | 2018-03-23T09:23:54Z | |
dc.date.created | 2018-02-09T08:33:58Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | Marine Structures. 2018, 59 47-59. | nb_NO |
dc.identifier.issn | 0951-8339 | |
dc.identifier.uri | http://hdl.handle.net/11250/2491838 | |
dc.description.abstract | Carbon fiber composite plastic (CFRP) rods immersed in water present a pronounced anisotropic diffusion behavior. Understanding and predicting this behavior is important as the mechanical properties of the material are influenced by the moisture content. A simple experimental procedure allowing identification of both radial and axial diffusivity is presented. The diffusivities are calculated based on a new anisotropic analytical or numerical analysis. The diffusivity in the axial direction was found to be 14.3 times the diffusivity in radial direction. The analytical and numerical approaches show a good agreement. A practical engineering case study is also presented: the moisture content profile of a carbon fiber rod inside a cylindrical metal end fitting for long exposure times (5, 10, 25 and 50 years). | nb_NO |
dc.language.iso | eng | nb_NO |
dc.publisher | Elsevier | nb_NO |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internasjonal | * |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/deed.no | * |
dc.title | Anisotropic fluid diffusion in carbon fiber reinforced composite rods: Experimental, analytical and numerical study | nb_NO |
dc.type | Journal article | nb_NO |
dc.type | Peer reviewed | nb_NO |
dc.description.version | acceptedVersion | nb_NO |
dc.source.pagenumber | 47-59 | nb_NO |
dc.source.volume | 59 | nb_NO |
dc.source.journal | Marine Structures | nb_NO |
dc.identifier.doi | 10.1016/j.marstruc.2018.01.003 | |
dc.identifier.cristin | 1563478 | |
dc.description.localcode | © 2018. This is the authors’ accepted and refereed manuscript to the article. Locked until 6.2.2020 due to copyright restrictions. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ | nb_NO |
cristin.unitcode | 194,64,92,0 | |
cristin.unitname | Institutt for maskinteknikk og produksjon | |
cristin.ispublished | true | |
cristin.fulltext | postprint | |
cristin.qualitycode | 2 | |