Blar i Institutt for konstruksjonsteknikk på utgivelsesdato
Viser treff 41-60 av 2466
-
Pumping of concrete and Mortar - State of the art
(COIN Project report;5-2008, Research report, 2008)The pumpability of concrete, or its ability to move through pipes and hoses by the help of a pump while maintaining its fresh and hardened properties, can be quantified as being better the lower the necessary pressure to ... -
Validation study of failure prediction in crash analysis
(Chapter, 2008)Modeling of plastic deformation and failure is critical in crash analysis. In the present paper, we have studied one approach to represent instabilities and damage evolution in non-linear finite element analyses of forming ... -
Low-Velocity Penetration of Aluminium Plates
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:46, Doctoral thesis, 2008)The present thesis describes research on quasi-static and low velocity perforation of rolled aluminium plates, where the main objective has been to gain a better knowledge of the physical processes taking place during this ... -
Size effect on mechanical properties of micron-sized PS-DVB polymer particles
(Journal article; Peer reviewed, 2008)A nanoindentation based flat punch method has been developed to determine the stress-strain behaviour of single micron-sized Ugelstad polystyrene-co-divinylbenzene (PS-DVB) particles in compression. Five groups of particles ... -
Constitutive modelling of morellised bone
(Doctoral thesis, 2008) -
Spillvarmeutnyttelse ved Aluminiumsverk
(Master thesis, 2008)Hensikten med denne oppgaven var å kartlegge spillvarmestrømmene på et aluminiumsverk, samt diskutere deres utnyttelsespotensialer. Det ble ansett som mest hensiktsmessig å ta utgangspunkt i Hydro Aluminium Sunndal. Hydro ... -
Cracking risk of concrete structures in the hardening phase: Experiments, material modeling and finite element analysis
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:198, Doctoral thesis, 2008) -
Frost dilation measurements on concrete cores from a dam with ASR
(Chapter, 2008)In order to evaluate length change measurements to determine damage in concrete due to both ASR and internal frost attack, concrete cores drilled from a 25 year old dam with slight ASR and some surface frost damage were ... -
Experimental Investigations of Wind Loading on a Suspension Bridge Girder
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:131, Doctoral thesis, 2008) -
Modelling and numerical analysis of the porcine and human mitral apparatus
(Doktoravhandlinger ved NTNU, 1503-8181; 2008:249, Doctoral thesis, 2008) -
Blast loaded window glasses: Eksplosjonslast på vindusglass
(Master thesis, 2009) -
Evaluation of fracture parameters for notched multi-layered structures
(Doktoravhandlinger ved NTNU, 1503-8181; 2009:137, Doctoral thesis, 2009)For the last three decades, the field of MEMS (Micro-Electro-Mechanical Systems) has emerged to a technology with significant potential. Re-entrant sharp corners or notches have increasingly appeared in MEMS fabrication ... -
Foundation Modeling and its Influence to the Dynamic Response of Fixed OffshoreWind Turbines
(Master thesis, 2009) -
Ny steinhvelvbru over Farriselva: Byggeteknikk og statiske beregninger/dimensjonering
(Master thesis, 2009) -
Kapasitet og stivhet til bjelke/søyleknutepunkter
(Master thesis, 2009) -
Tribocorrosion properties of 25% Cr super duplex stainless steel
(Master thesis, 2009) -
Low Velocity Perforation of Steel Plates
(Master thesis, 2009) -
Konstruksjonsanalyse av en betongplattform for arktiskestrøk
(Master thesis, 2009)