Blar i Institutt for konstruksjonsteknikk på tittel
Viser treff 427-446 av 2466
-
Chains in Mooring Systems
(Master thesis, 2014)Mooring systems of floating structures consist of long lengths of chain, rope or wire, or a combination of these elements. As part of a station-keeping system, the mooring lines have to keep the movements of the structure ... -
Challenges related to structural modelling and assessment of concrete structures affected by alkali-silica reactions
(Chapter, 2017)Alkali-Silica Reaction (ASR) in concrete is a chemical process between dissolved alkali and hydroxyl ions from pore solutions in the cement paste, and reactive (amorphous) silica within the aggregates. The product of the ... -
Characterisation of calcined raw clays suitable as supplementary cementitious materials
(Journal article; Peer reviewed, 2018)The potential use of two raw clays (Clay A: kaolin; Clay B: calcareous montmorillonite) as supplementary cementitious material (SCM) in blended cements was investigated. Cement replacement in mortars by 20% calcined Clay ... -
Characteristics of cyclic undrained model SANISAND-MSu and their effects on response of monopiles for offshore wind structures
(Journal article; Peer reviewed, 2021) -
Characterization and analysis of Coscinodiscus genus frustule based on FIB-SEM
(Journal article; Peer reviewed, 2017)Coscinodiscus genus, a type of diatoms with complex frustule, has been widely studied and reported because of their delicate nanostructures. In this paper, a dual beam system focused ion beam and scanning electron microscope ... -
Characterization and modeling of the mechanical behavior of polymer foam
(Doctoral theses at NTNU;2021:173, Doctoral thesis, 2021)Polymer foams are often used in safety applications, for example in pedestrian impact protection where a polymer foam bumper can increase pedestrian safety in the event of an accident. Application of this type of material ... -
Characterization and Modelling of the Anisotropic Behaviour of High-Strength Aluminium Alloy
(Doktoravhandlinger ved NTNU, 1503-8181; 2014:37, Doctoral thesis, 2014)The purpose of the present study is to describe and characterize the anisotropic flow and fracture behaviour of a high-strength aluminium alloy. To this end, thick plates of AA7075-T651 aluminium alloy have been ... -
Characterization of High Carbon Steel C68 at Elevated Temperatures and Different Strain Rates
(Journal article; Peer reviewed, 2012)This paper presents high-temperature tensile testing. This method is used to characterize the mechanical behaviour of a high-carbon steel C68 at temperatures up to 720°C. Samples are heated by an induction system controlled ... -
Characterization of next generation pozzolana and their properties in cement based materials
(Master thesis, 2009) -
Characterization of the quasi-liquid layer on gas hydrates with molecular dynamics simulations
(Peer reviewed; Journal article, 2024)Understanding the properties of the surficial quasi-liquid layer (QLL) is a prerequisite in proper handling of gas hydrates, a potential alternative future energy resource. Despite of its critical importance, the ... -
Chloride binding in concrete: recent investigations and recognised knowledge gaps: RILEM Robert L’Hermite Medal Paper 2021
(Journal article; Peer reviewed, 2021)A theoretical understanding of chloride binding is urgently needed if we are to use the new low-CO2 composite cements in reinforced concrete structures exposed to chloride-loaded environments. The empirical models and ... -
Chloride binding in Portland composite cements containing metakaolin and silica fume
(Peer reviewed; Journal article, 2022)This paper investigates how the composition of Portland composite cements affects their chloride-binding properties. Hydrated cement pastes prepared with a reference Portland cement and composite Portland cements containing ... -
Chloride induced reinforcement corrosion in concrete: Concept of critical chloride content – methods and mechanisms
(Doktoravhandlinger ved NTNU, 1503-8181; 2011:113, Doctoral thesis, 2011)Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete structures. Condition assessment and service life prediction is based on ... -
Chloride Ingress Determination in Offshore Concrete Structures Using µ-XRF
(Master thesis, 2019)Formålet med denne masteroppgaven var å se nærmere på μ-XRF som målemetode for kloridinntrenging i offshore betongkonstruksjoner. For å evaluere bruk av μ-XRF til dette formålet, ble den sammenlignet med to andre analysemetoder: ... -
Chloride Ingress Determination in Offshore Concrete Structures Using µ-XRF
(Master thesis, 2019)Formålet med denne masteroppgaven var å se nærmere på µ-XRF som målemetode for kloridinntrenging i offshore betongkonstruksjoner. For å evaluere bruk av µ-XRF til dette formålet, ble den sammenlignet med to andre analysemetoder: ... -
Chloride Ingress in Concrete - A Sensitivity Analysis of the Input Parameters in the fib Model for Chloride Ingress and a Validation of the Model for Short Exposure Times
(Master thesis, 2016)Chloride transport in concrete is a rather complex process. There are numerous different models one can use to estimate chloride ingress in concrete. The fib model code presents a model based on an error function solution ... -
Chloride-binding capacity of hydrotalcite in cement pastes containing dolomite and metakaolin
(Journal article; Peer reviewed, 2018)In this study, we investigated well-hydrated cement pastes containing dolomite and metakaolin cured at 38 °C or 60 °C, which were exposed to NaCl or CaCl2 solutions of various concentrations. We determined the chloride-binding ... -
Cholesterol Deficiency Causes Impaired Osmotic Stability of Cultured Red Blood Cells
(Journal article; Peer reviewed, 2019)Ex vivo generation of red blood cells (cRBCs) is an attractive tool in basic research and for replacing blood components donated by volunteers. As a prerequisite for the survival of cRBCs during storage as well as in the ... -
Classification boundaries for stiffness of beam-column joints and column bases
(Chapter, 2012)Eurocode 3 part 1-8 gives stiffness boundaries for nominally pinned, semi-rigid and rigid beam-to-column joints and for semi-rigid and rigid column bases. The background for these limits has been investigated and analysed ... -
Clay-based geopolymer as the sole binder in concrete
(Master thesis, 2023)Den minskende tilgjengeligheten av geopolymere slik som flygeaske (FA) og Slagg (GGBS), i kombinasjon med en økende etterspørsel etter supplementære materialer for å erstatte Portlandsement (OPC) i betongindustrien, ...